nach oben

European Journal of Wood and Wood Products

Erschienen in:

04.08.2022 | Original Article

A comparison of three wood species (poplar, birch and oak) for crash application

verfasst von: R. Guélou, F. Eyma, A. Cantarel, S. Rivallant, B. Castanié

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper presents the results of static and dynamic crushing of wood tubes made of poplar, birch and oak veneer. Despite different veneer thicknesses (poplar: 1 mm, birch: 0.5 mm and oak: 0.75 mm), the tubes have the same overall dimensions to enable comparisons. The static tests were carried out on an MTS 100 kN machine between two loading plates and the dynamic tests were carried out on a drop weight testing machine. The dynamic specific energy absorption is, on average, 32 J/g, 35.5 J/g and 38.5 J/g for poplar, oak and birch, respectively. The energies absorbed in dynamic tests for poplar, oak and birch are on average 1581 J, 2544 J and 3245 J, respectively. These characteristics, which are quite comparable with those of tubes made of composite materials, show that these materials are serious candidates for energy absorption at low carbon cost and with renewable materials.

Vorheriger Artikel Elastoplastic performance of wood under compression load considering cross-grain orientation and moisture content

Nächster Artikel Surface characterization of wood treated with acidic deep eutectic solvents

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Asada R, Cardellini G, Mair-Bauernfeind C, Wenger J, Haas V, Holzer D et al (2020) Effective bioeconomy? A MRIO-based socioeconomic and environmental impact assessment of generic sectoral innovations. Technol Forecast Soc Change 153:119946. https://doi.org/10.1016/j.techfore.2020.119946CrossRef

Atas C, Sevim C (2010) On the impact response of sandwich composites with cores of balsa wood and PVC foam. Comp Struct 93:40–48. https://doi.org/10.1016/j.compstruct.2010.06.018CrossRef

Aura Aéro: https://aura-aero.com/ accessed 2021/07/09

Robin Aircraft: https://www.robin-aircraft.com// accessed 2021/07/09

Mauboussin Aircrafts: https://www.avionsmauboussin.fr/ accessed 2021/07/09

Balıkoğlu F, Demircioğlu TK, İnal O, Arslan N, Ataş A (2018) Compression after low velocity impact tests of marine sandwich composites: Effect of intermediate wooden layers. Comp Struct 183:636–642. https://doi.org/10.1016/j.compstruct.2017.08.003CrossRef

Basha M, Wagih A, Melaibari A, Lubineau G, Eltaher MA (2022a) On the impact damage resistance and tolerance improvement of hybrid CFRP/Kevlar sandwich composites. Micropor Mesopor Mater 333:111732. https://doi.org/10.1016/j.micromeso.2022.111732CrossRef

Basha M, Wagih A, Melaibari A, Lubineau G, Abdraboh AM, Eltaher MA (2022b) Impact and post-impact response of lightweight CFRP/wood sandwich composites. Comp Struct 279:114766. https://doi.org/10.1016/j.compstruct.2021.114766CrossRef

Bergman R, Puettmann M, Taylor A, Skog KE (2014) The carbon impacts of wood products. For Prod J 64:220–31. https://doi.org/10.13073/FPJ-D-14-00047

Caetano L, Grolleau V, Galpin B, Penin A, Capdeville J (2018) High strain rate out-of-plane compression of birch plywood from ambient to cryogenic temperatures. Strain 54:e12264. https://doi.org/10.1111/str.12264CrossRef

Castanie B, Bouvet C, Ginot M (2020) Review of composite sandwich structure in aeronautic applications. Comp Part C 1:100004. https://doi.org/10.1016/j.jcomc.2020.100004CrossRef

Demircioğlu TK, Balıkoğlu F, İnal O, Arslan N, I. Ay I, Ataş A, (2018) Experimental investigation on low-velocity impact response of wood skinned sandwich composites with different core configurations. Mat Today Com 17:31–39. https://doi.org/10.1016/j.mtcomm.2018.08.003CrossRef

Eisenacher G, Scheidemann R, Neumann M, Droste B, Völzke H (2013) Dynamic crushing characteristics of spruce wood under large deformations. Wood Sci Technol 47(2):369–380. https://doi.org/10.1007/s00226-012-0508-5CrossRef

Fengel D, Wegener G (1983) Wood: Chemistry, ultrastructure, reactions. DE GRUYTER. https://doi.org/10.1515/9783110839654CrossRef

Forest Product Laboratory. Wood Handbook Wood as an Engineering Material. United States Department of Agriculture, Forest Service; 2010.

Guélou R, Eyma F, Cantarel A, Rivallant S, Castanié B (2021a) Crashworthiness of poplar wood veneer tubes. Int J Impact Eng 147:103738. https://doi.org/10.1016/j.ijimpeng.2020.103738CrossRef

Guélou R, Eyma F, Cantarel A, Rivallant S, Castanié B (2021b) Static crushing of wood based sandwich composite tubes. Comp Struct 273:114317. https://doi.org/10.1016/j.compstruct.2021.114317CrossRef

Guélou R, Eyma F, Cantarel A, Rivallant S (2021) Castanié B (2021c) Dynamic crushing of wood based sandwich composite tubes. Mech Adv Mat Struct. https://doi.org/10.1080/153764941991533CrossRef

Johnson W (1986) Historical and present-day references concerning impact on wood. Int J Imp Eng 4(3):161–174CrossRef

Kavermann SW, Bhattacharyya D (2019) Experimental investigation of the static behaviour of a corrugated plywood sandwich core. Comp Struct 207:836–844. https://doi.org/10.1016/j.compstruct.2018.09.094CrossRef

Leeuwenburg: https://www.leeuwenburgh.com/fr/qui-sommes-nous/. Accessed July 5, 2022

Liu J, Zhang T, Jiang W, Liu J (2019) Mechanical response of a novel composite Y-frame core sandwich panel under shear loading. Comp Struct 224:111064. https://doi.org/10.1016/j.compstruct.2019.111064CrossRef

Liu T, Hou S, Nguyen XT, Han X (2017) Energy absorption characteristics of sandwich structures with composite sheets and bio coconut core. Comp Part B 114:328–338. https://doi.org/10.1016/j.compositesb.2017.01.035CrossRef

Lu C, Hou S, Zhang Z, Chen J, Li Q, Han X (2017) The mystery of coconut overturns the crashworthiness design of composite materials. Int J Mech Sci 168:105244. https://doi.org/10.1016/j.ijmecsci.2019.105244CrossRef

Melaibari A, Wagih A, Basha M, Kabeel AM, Lubineau G, Eltaher MA (2021) Bio-inspired composite laminate design with improved out-of-plane strength and ductility. Comp Part A 144:106362. https://doi.org/10.1016/j.compositesa.2021.106362CrossRef

Müller U, Jost T, Kurzböck C, Stadlmann A, Wagner W, Kirschbichler S, Baumann G, Pramreiter M, Feist F (2020) Crash simulation of wood and composite wood for future automotive engineering. Wood Mat Sci Eng 15(5):312–324. https://doi.org/10.1080/17480272.2019.1665581CrossRef

Neveu F, Castanié B, Olivier P (2019) The GAP methodology: a new way to design composite structures. Mat Des 172:107755. https://doi.org/10.1016/j.matdes.2019.107755CrossRef

Nguyen XT, Hou S, Liu T, Han X (2016) A potential natural energy absorption material – Coconut mesocarp: Part A: Experimental investigations on mechanical properties. Int J Mech Scie 115–116:564–573. https://doi.org/10.1016/j.ijmecsci.2016.07.017CrossRef

Palomba G, Epasto G, Crupi V (2021) Lightweight sandwich structures for marine applications: a review. Mech Adv Mat Struct On Line. https://doi.org/10.1080/15376494.2021.1941448CrossRef

Pang S, Liang Y, Tao W, Liu Y, Huan S, Qin H (2019) Effect of the strain rate and fiber direction on the dynamic mechanical properties of beech wood. Forests 10(10):881. https://doi.org/10.3390/f10100881CrossRef

Qi Y, Fang H, Shi H, Liu W, Qi Y, Bai Y (2017) Bending performance of GFRP-wood sandwich beams with lattice-web reinforcement in flatwise and sidewise directions. Constr Build Mater 156:532–545. https://doi.org/10.1016/j.conbuildmat.2017.08.136CrossRef

Rohumaa A, Viguier J, Girardon S, Krebs M, Denaud L (2018) Lathe check development and properties: effect of log soaking temperature, compression rate, cutting radius and cutting speed during peeling process of European beech (Fagus sylvatica L.) veneer. Eur J Wood Prod 76:1653–1661. https://doi.org/10.1007/s00107-018-1341-9CrossRef

Saavedra Flores EI, Saavedra K, Hinojosa J, Chandra Y, Das R (2016) Multi-scale modelling of rolling shear failure in cross-laminated timber structures by homogenisation and cohesive zone models. Int J Sol Struct 81:219–232. https://doi.org/10.1016/j.ijsolstr.2015.11.027CrossRef

Šebek F, Kubík P, Brabec M, Tippner J (2020) Modelling of impact behaviour of European beech subjected to split Hopkinson pressure bar test. Comp Struct 245:112330. https://doi.org/10.1016/j.compstruct.2020.112330CrossRef

Smardzewski J (2019a) Wooden sandwich panels with prismatic core – Energy absorbing capabilities. Comp Struct 230:111535. https://doi.org/10.1016/j.compstruct.2019.111535CrossRef

Smardzewski J (2019b) Experimental and numerical analysis of wooden sandwich panels with an auxetic core and oval cells. Mat Des 183:108159. https://doi.org/10.1016/j.matdes.2019.108159CrossRef

Smardzewski J, Wojciechowski KW (2019) Response of wood-based sandwich beams with three-dimensional lattice core. Comp Struct 216:340–349. https://doi.org/10.1016/j.compstruct.2019.03.009CrossRef

Susainathan J, Eyma F, De Luycker E, Cantarel A, Castanie B (2017) Manufacturing and quasi-static bending behavior of wood-based sandwich structures. Comp Struct 182:487–504. https://doi.org/10.1016/j.compstruct.2017.09.034CrossRef

Susainathan J, Eyma F, De Luycker E, Cantarel A, Castanie B (2018) Experimental investigation of impact behavior of wood-based sandwich structures. Comp Part A 109:10–19. https://doi.org/10.1016/j.compositesa.2018.02.029CrossRef

Susainathan J, Eyma F, De Luycker E, Cantarel A, Bouvet C, Castanie B (2019) Experimental investigation of compression and compression after impact of wood-based sandwich structures. Comp Struct 220:236–249. https://doi.org/10.1016/j.compstruct.2019.03.095CrossRef

Susainathan J, Eyma F, De Luycker E, Cantarel A, Castanie B (2020) Numerical modeling of impact on wood-based sandwich structures. Mech Adv Mat Struct 27:583–598. https://doi.org/10.1080/15376494.2018.1519619CrossRef

Trouy MC, Triboulot P (2019) Wood material - Structure and characteristics. vol. C925v4. Techniques de l’ingénieur

Vural M, Ravichandran G (2003) Dynamic response and energy dissipation characteristics of balsa wood: experiment and analysis. Int J Sol Struct 40(9):2147–2170. https://doi.org/10.1016/S0020-7683(03)00057-XCrossRef

Wang X, Shi X, Meng Q, Hu Y, Wang L (2020) Bending behaviors of three grid sandwich structures with wood facing and jute fabrics/epoxy composites cores. Comp Struct 252:112666. https://doi.org/10.1016/j.compstruct.2020.112666CrossRef

Wouts J, Haugou G, Oudjene M, Coutellier D, Morvan H (2016) Strain rate effects on the compressive response of wood and energy absorption capabilities - Part A: Experimental investigations. Comp Struct 149:315–328. https://doi.org/10.1016/j.compstruct.2016.03.058CrossRef

Wouts J, Haugou G, Oudjene M, Coutellier D, Morvan H (2018) Strain rate effects on the compressive response of wood and energy absorption capabillities - Part B: Experimental investigation under rigid lateral confinement. Compos Struct 204:95–104. https://doi.org/10.1016/j.compstruct.2018.07.001CrossRef

Zhang Y, Wang J, Lin J, Zhang F, Yan X (2021) Crushing mechanical responses of natural wood columns and wood-filled composite columns. Eng Fail Anal 124:105358. https://doi.org/10.1016/j.engfailanal.2021.105358CrossRef

Zhao X (2015) Effects of cambial age and flow path-length on vessel characteristics in birch. J for Res 20:175–185. https://doi.org/10.1007/s10310-014-0458-xCrossRef

Zimmermann MH (1978) Hydraulic architecture of some diffuse-porous trees. Can J Bot 56:2286–2295. https://doi.org/10.1139/b78-274CrossRef

Titel: A comparison of three wood species (poplar, birch and oak) for crash application
verfasst von: R. Guélou
F. Eyma
A. Cantarel
S. Rivallant
B. Castanié
Publikationsdatum: 04.08.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 1/2023
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-022-01871-x

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

Analysis of the interaction between internal porosity and oriented strand board performance using X-ray computed tomography

Accelerated weathering of Compreg with phenol-formaldehyde resin treated top veneers of European white oak (Quercus ssp., L.) and teak (Tectonia grandis, L.F.)

Understanding the effect of PF glue impregnation on the shear strength of wood growth ring boundary

Correction: Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials

Modelling the process of splitting wood and chipless cutting Pinus sylvestris L. wood in terms of designing the geometry of the tools and the driving force of the machine