nach oben

Journal of Sol-Gel Science and Technology

10.05.2024 | Original Paper

Modified release of D-glucose incorporated into laponite/ureasil–poly(ethylene oxide) hybrid nanocomposite

verfasst von: Naara Felipe da Fonsêca, José de Oliveira Alves-Júnior, Genil Dantas de Oliveira, Kammila Martins Nicolau Costa, Demis Ferreira de Melo, Pedro José Rolim Neto, Meiry Gláucia Freire Rodrigues, João Augusto Oshiro-Junior

Erschienen in: Journal of Sol-Gel Science and Technology

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this study was to demonstrate the influence of laponite smectite clay on the structural properties and release profile of the ureasil-polyether organic-inorganic hybrid nanocomposite. The sol–gel process was used to synthesize the systems combined with the nano-clay, and three concentrations of D-glucose (3, 5, and 10 wt.%) were analyzed for incorporation. The nanocomposite with the most stable D-glucose concentration was used for the release test. The characterization of the laponite colloidal solution was carried out using different viscosity analyses which showed that the 1.5% proportion was the most suitable for formulation due to the formation of a stable gel. The hybrid membrane characterization techniques using infrared spectroscopy and differential thermal analysis show that the formulation components have no chemical or physical incompatibility with D-glucose; the XRD diffractograms confirm that the crystalline domains of D-glucose are suppressed when incorporated into the amorphous Ureasil-polyether material, indicating complete solubilization in the matrix. Finally, the release results show that 20% of the D-glucose was released in 700 min, with a Korsmeyer-Peppas-type kinetic model. Thus, we can conclude that the nanocomposite developed here showed homogeneity and integrity, with satisfactory and adjustable properties such as its mechanical characteristics and the amount of active release, paving the way for its use in various therapies such as bone regeneration.

Graphical Abstract

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Erezuma I, Eufrasio-da-Silva T, Golafshan N, Deo K, Mishra YK, Castilho M, Gaharwar AK, Leeuwenburgh S, Dolatshahi-Pirouz A, Orive G (2021) Nanoclay reinforced biomaterials for mending musculoskeletal tissue disorders. Adv Health Mater 10:e2100217. https://doi.org/10.1002/adhm.202100217CrossRef

Jesus CRN, Molina EF, Pulcinelli SH, Santilli CV (2018) Highly controlled diffusion drug release from ureasil-poly(ethylene oxide)-Na+-montmorillonite hybrid hydrogel nanocomposites. ACS Appl Mater Interfaces 10:19059–19068. https://doi.org/10.1021/acsami.8b04559CrossRefPubMed

Khurana IS, Kaur S, Kaur H, Khurana RK (2015) Multifaceted role of clay minerals in pharmaceuticals. Future Sci OA 1:FSO6. https://doi.org/10.4155/fso.15.6CrossRefPubMedPubMedCentral

Saveleva MS, Eftekhari K, Abalymov A, Douglas TEL, Volodkin D, Parakhonskiy BV, Skirtach AG (2019) Hierarchy of hybrid materials—the place of inorganics-in-organics in it, their composition and applications. Front Chem 7:179. https://doi.org/10.3389/fchem.2019.00179CrossRefPubMedPubMedCentral

Faustini M, Nicole L, Ruiz‐Hitzky E, Sanchez C (2018) History of organic–inorganic hybrid materials: prehistory, art, science, and advanced applications. Adv Funct Mater 28. https://doi.org/10.1002/adfm.201704158

Manatunga DC, Godakanda VU, de Silva RM, de Silva KMN (2020) Recent developments in the use of organic-inorganic nanohybrids for drug delivery. Wiley Interdiscip Rev Nanomed Nanobiotechnol 12:e1605. https://doi.org/10.1002/wnan.1605CrossRefPubMed

Kojima Y, Usuki A, Kawasumi M, Okada A, Fukushima Y, Kurauchi T, Kamigaito O (1993) Mechanical properties of nylon 6-clay hybrid. J Mater Res 8:1185–1189. https://doi.org/10.1557/JMR.1993.1185CrossRef

Sharma B, Malik P, Jain P (2018) Biopolymer reinforced nanocomposites: a comprehensive review. Mater Today Commun 16:353–363. https://doi.org/10.1016/j.mtcomm.2018.07.004CrossRef

Kim MH, Choi G, Elzatahry A, Vinu A, Choy YB, Choy J-H (2016) Review of clay-drug hybrid materials for biomedical applications: administration routes. Clays Clay Min 64:115–130. https://doi.org/10.1346/CCMN.2016.0640204CrossRef

10.

Borrego-Sánchez A, Sánchez-Espejo R, García-Villén F, Viseras C, Sainz-Díaz CI (2020) Praziquantel-clays as accelerated release systems to enhance the low solubility of the drug. Pharmaceutics 12:914. https://doi.org/10.3390/pharmaceutics12100914CrossRefPubMedPubMedCentral

11.

Xiao S, Castro R, Maciel D, Gonçalves M, Shi X, Rodrigues J, Tomás H (2016) Fine tuning of the pH-sensitivity of laponite-doxorubicin nanohybrids by polyelectrolyte multilayer coating. Mater Sci Eng C Mater Biol Appl 60:348–356. https://doi.org/10.1016/j.msec.2015.11.051CrossRefPubMed

12.

Câmara GBM, Barbosa RM, García-Villén F, Viseras C, Almeida Júnior RF, Machado PRL, Câmara CA, Farias KJS, de Lima E, Moura TFA, Dreiss CA, Raffin FN (2021) Nanocomposite gels of poloxamine and Laponite for β-Lapachone release in anticancer therapy. Eur J Pharm Sci 163:105861. https://doi.org/10.1016/j.ejps.2021.105861CrossRefPubMed

13.

Oshiro Junior JA, Carvalho FC, Soares CP, Chorilli M, Chiavacci LA (2015) Development of cutaneous bioadhesive ureasil-polyether hybrid films. Int J Polym Sci 2015:1–7. https://doi.org/10.1155/2015/727324CrossRef

14.

Caravieri BB, de Oliveira PF, Furtado RA, Tavares DC, Nassar EJ, Ciuffi KJ, Molina EF (2014) Solubility enhancement of ibuprofen using tri-ureasil-PPO hybrid: structural, cytotoxic, and drug release investigation. J Sol Gel Sci Technol 72:627–636. https://doi.org/10.1007/s10971-014-3485-3CrossRef

15.

Paredes M, Pulcinelli SH, Peniche C, Gonçalves V, Santilli CV (2014) Chitosan/(ureasil–PEO hybrid) blend for drug delivery. J Sol Gel Sci Technol 72:233–238. https://doi.org/10.1007/s10971-014-3314-8CrossRef

16.

de Jesus NAM, de Oliveira AHP, Tavares DC, Furtado RA, de Silva MLA, Cunha WR, Molina EF (2018) Biofilm formed from a tri-ureasil organic–inorganic hybrid gel for use as a cubebin release system. J Sol Gel Sci Technol 88:192–201. https://doi.org/10.1007/s10971-018-4780-1CrossRef

17.

Molina EF, Marçal L, Pereira de Carvalho HW, Nassar EJ, Ciuffi KJ (2013) Tri-ureasil gel as a multifunctional organic–inorganic hybrid matrix. Polym Chem 4:1575–1582. https://doi.org/10.1039/C2PY21049ECrossRef

18.

de Santana WMOS, Abramson S, Fini R, Caetano BL, Ménager C, Pulcinelli SH, Santilli CV (2021) Ureasil–polyether–CoFe 2 O 4 nanocomposites: coupling a drug delivery system and magnetic hyperthermia. ACS Appl Polym Mater 3:4837–4848. https://doi.org/10.1021/acsapm.1c00496CrossRef

19.

Bezerra BMS, Y Araújo SEDM, Alves-Júnior JO, Damasceno BPGL, Oshiro-Junior JA (2024) The efficacy of hybrid vaginal ovules for co-delivery of curcumin and miconazole against Candida albicans. Pharmaceutics 16:312. https://doi.org/10.3390/pharmaceutics16030312CrossRefPubMedPubMedCentral

20.

Chiu Y-C, Liao Y-C (2022) Nanocomposite coatings to induce pigment precipitation for durable paper-based foldable electronics. ACS Appl Electron Mater 4:3938–3946. https://doi.org/10.1021/acsaelm.2c00601CrossRef

21.

Li H, Zhao J, Huang L, Xia P, Zhou Y, Wang J, Jiang L (2022) A constrained assembly strategy for high-strength natural nanoclay film. ACS Nano 16:6224–6232. https://doi.org/10.1021/acsnano.2c00023CrossRefPubMed

22.

He S, He T, Wang J, Wu X, Xue Y, Zhang L, Lin J (2019) A novel method to prepare acrylonitrile-butadiene rubber/clay nanocomposites by compounding with clay gel. Compos B Eng 167:356–361. https://doi.org/10.1016/j.compositesb.2019.03.013CrossRef

23.

Ahmed Ben Hassan S, Stojanović DB, Kojović A, Janković-C̆astvan I, Janaćković D, Uskoković PS, Aleksić R (2014) Preparation and characterization of poly(vinyl butyral) electrospun nanocomposite fibers reinforced with ultrasonically functionalized sepiolite. Ceram Int 40:1139–1146. https://doi.org/10.1016/j.ceramint.2013.06.115CrossRef

24.

Oshiro JA, Lusuardi A, Beamud EM, Chiavacci LA, Cuberes MT (2021a) Nanostructural arrangements and surface morphology on ureasil-polyether films loaded with dexamethasone acetate. Nanomaterials 11:1362. https://doi.org/10.3390/nano11061362CrossRefPubMed

25.

ASTM International (2013) Standard practice for surface wettability of coatings, substrates and pigments by advancing contact angle measurement, ASTM D7334-08 (2013) 06.01. https://doi.org/10.1520/D7334-08R22

26.

Cummins HZ (2007) Liquid, glass, gel: the phases of colloidal laponite. J Non Cryst Solids 353:3891–3905. https://doi.org/10.1016/j.jnoncrysol.2007.02.066CrossRef

27.

Ruzicka B, Zaccarelli E (2011) A fresh look at the laponite phase diagram. Soft Matter 7:1268. https://doi.org/10.1039/c0sm00590hCrossRef

28.

Ruzicka B, Zulian L, Zaccarelli E, Angelini R, Sztucki M, Moussaïd A, Ruocco G (2010) Competing interactions in arrested states of colloidal clays. Phys Rev Lett 104:085701. https://doi.org/10.1103/PhysRevLett.104.085701CrossRefPubMed

29.

Jatav S, Joshi YM (2017) Phase behavior of aqueous suspension of laponite: new insights with microscopic evidence. Langmuir 33:2370–2377. https://doi.org/10.1021/acs.langmuir.7b00151CrossRefPubMed

30.

Au P-I, Hassan S, Liu J, Leong Y-K (2015) Behaviour of LAPONITE® gels: rheology, ageing, pH effect and phase state in the presence of dispersant. Chem Eng Res Des 101:65–73. https://doi.org/10.1016/j.cherd.2015.07.023CrossRef

31.

Lapasin R, Abrami M, Grassi M, Šebenik U (2017) Rheology of laponite-scleroglucan hydrogels. Carbohydr Polym 168:290–300. https://doi.org/10.1016/j.carbpol.2017.03.068CrossRefPubMed

32.

Huang X, Lv K, Sun J, Lu Z, Bai Y, Shen H, Wang J (2019) Enhancement of thermal stability of drilling fluid using laponite nanoparticles under extreme temperature conditions. Mater Lett 248:146–149. https://doi.org/10.1016/j.matlet.2019.04.005CrossRef

33.

Wang J, Sun J, Wang R, Rui Z, Cheng R, Wang Q, Wang J, Lv K (2022) Impact of laponite on the formation of NGHs and its adaptability for use in NGH drilling fluids. J Nat Gas Sci Eng 107:104799. https://doi.org/10.1016/j.jngse.2022.104799CrossRef

34.

Daga VK, Wagner NJ (2006) Linear viscoelastic master curves of neat and laponite-filled poly(ethylene oxide)–water solutions. Rheol Acta 45:813–824. https://doi.org/10.1007/s00397-005-0059-xCrossRef

35.

Oshiro-Junior JA, Barros RM, da Silva CG, de Souza CC, Scardueli CR, Marcantonio CC, da Silva Saches PR, Mendes L, Cilli EM, Marcantonio RAC, Chiavacci LA (2021) In vivo effectiveness of hybrid membranes with osteogenic growth peptide for bone regeneration. J Tissue Eng Regen Med 15:722–731. https://doi.org/10.1002/term.3226CrossRefPubMed

36.

Oshiro JA, Scardueli CR, de Oliveira GJPL, Marcantonio RAC, Chiavacci LA (2017) Development of ureasil–polyether membranes for guided bone regeneration. Biomed Phys Eng Express 3:015019. https://doi.org/10.1088/2057-1976/aa56a6CrossRef

37.

Baghdadi HA, Sardinha H, Bhatia SR (2005) Rheology and gelation kinetics in laponite dispersions containing poly(ethylene oxide). J Polym Sci B Polym Phys 43:233–240. https://doi.org/10.1002/polb.20317CrossRef

38.

de Zea Bermudez V, Carlos LD, Alcácer L (1999) Sol–gel derived urea cross-linked organically modified silicates. 1. Room temperature mid-infrared spectra. Chem Mater 11:569–580. https://doi.org/10.1021/cm980372vCrossRef

39.

Pavia DL, Lampman GM, Kriz GS, Vyvyan JR (2014) Introduction to spectroscopy, 5th edn. Cengage Learning, Brazil

40.

Chan-Chan LH, González-García G, Vargas-Coronado RF, Cervantes-Uc JM, Hernández-Sánchez F, Marcos-Fernandez A, Cauich-Rodríguez JV (2017) Characterization of model compounds and poly(amide-urea) urethanes based on amino acids by FTIR, NMR and other analytical techniques. Eur Polym J 92:27–39. https://doi.org/10.1016/j.eurpolymj.2017.04.014CrossRef

41.

Mendes JF, Oshiro JA, da Silva CG, Chiavacci LA (2021) Synthesis of ureasil-polyether film forming materials by using environmentally friendly solvent. Rev Ciênc Farm Básica Apl 42:e730. https://doi.org/10.4322/2179-443X.0730CrossRef

42.

Pálková H, Madejová J, Zimowska M, Serwicka EM (2010) Laponite-derived porous clay heterostructures: II. FTIR study of the structure evolution. Microporous Mesoporous Mater 127:237–244. https://doi.org/10.1016/j.micromeso.2009.07.012CrossRef

43.

Ibrahim M, Alaam M, El-Haes H, Jalbout AF, de Leon A (2006) Analysis of the structure and vibrational spectra of glucose and fructose. Eclét Quím 31:15–21. https://doi.org/10.1590/S0100-46702006000300002CrossRef

44.

Chen Y, Mao W, Gao Y, Teng X, Zhu W, Chen Y, Zhao C, Li N, Wang C, Yan M, Shan J, Lin C, Guo T (2013) Structural elucidation of an extracellular polysaccharide produced by the marine fungus Aspergillus versicolor. Carbohydr Polym 93:478–483. https://doi.org/10.1016/j.carbpol.2012.12.047CrossRefPubMed

45.

Sahragard N, Jahanbin K (2017) Structural elucidation of the main water-soluble polysaccharide from Rubus anatolicus roots. Carbohydr Polym 175:610–617. https://doi.org/10.1016/j.carbpol.2017.08.042CrossRefPubMed

46.

Fernandes M, Barbosa PC, Manuela Silva M, Smith MJ, de Zea Bermudez V (2011) Di-ureasil hybrids doped with LiBF4: spectroscopic study of the ionic interactions and hydrogen bonding. Mater Chem Phys 129:385–393. https://doi.org/10.1016/j.matchemphys.2011.04.030CrossRef

47.

Patyk E, Katrusiak A (2015) Transformable H-bonds and conformation in compressed glucose. Chem Sci 6:1991–1995. https://doi.org/10.1039/C4SC03588GCrossRefPubMed

48.

de Guimarães AMF, Ciminelli VST, Vasconcelos WL (2007) Surface modification of synthetic clay aimed at biomolecule adsorption: synthesis and characterization. Mater Res 10:37–41. https://doi.org/10.1590/S1516-14392007000100009CrossRef

49.

Li H, Li M, Wang Y, Zhang W (2014) Luminescent hybrid materials based on laponite clay. Chemistry 20:10392–10396. https://doi.org/10.1002/chem.201402794CrossRefPubMed

50.

Nicolau Costa KM, Sato MR, Barbosa TLA, Rodrigues MGF, Medeiros ACD, de Damasceno BPGL, Oshiro-Júnior JA (2021) Curcumin-loaded micelles dispersed in ureasil-polyether materials for a novel sustained-release formulation. Pharmaceutics 13:675. https://doi.org/10.3390/pharmaceutics13050675CrossRefPubMedPubMedCentral

51.

Ghadiri M, Hau H, Chrzanowski W, Agus H, Rohanizadeh R (2013) Laponite clay as a carrier for in situ delivery of tetracycline. RSC Adv 3:20193. https://doi.org/10.1039/c3ra43217cCrossRef

52.

Lee JW, Thomas LC, Schmidt SJ (2011) Investigation of the heating rate dependency associated with the loss of crystalline structure in sucrose, glucose, and fructose using a thermal analysis approach (part I). J Agric Food Chem 59:684–701. https://doi.org/10.1021/jf1042344CrossRefPubMed

53.

Magoń A, Pyda M (2011) Melting, glass transition, and apparent heat capacity of α-D-glucose by thermal analysis. Carbohydr Res 346:2558–2566. https://doi.org/10.1016/j.carres.2011.08.022CrossRefPubMed

54.

Fagerson IS (1969) Thermal degradation of carbohydrates; a review. J Agric Food Chem 17:747–750. https://doi.org/10.1021/jf60164a019CrossRef

55.

Barbosa PC, Fernandes M, Vilela SMF, Gonçalves A, Oliveira MC, Fortunato E, Silva MM, Smith MJ, Rego R, Bermudez VZ (2011) Di-ureasil hybrids doped with LiBF 4: attractive candidates as electrolytes for “Smart Windows”. Int J Electrochem Sci 6. https://hdl.handle.net/1822/13611

56.

Paredes Zaldivar M, Santilli CV, Peniche Covas CA, Pulcinelli SH (2017) Thermal properties, nanoscopic structure and swelling behavior of chitosan/(ureasil–polyethylene oxide hybrid) blends. J Therm Anal Calorim 130:791–798. https://doi.org/10.1007/s10973-017-6454-6CrossRef

57.

Siqueira LJA, Constantino VRL, Camilo FF, Torresi RM, Temperini MLA, Ribeiro MCC, Izumi CMS (2014) Probing the local environment of hybrid materials designed from ionic liquids and synthetic clay by Raman spectroscopy. Spectrochim Acta A Mol Biomol Spectrosc 122:469–475. https://doi.org/10.1016/j.saa.2013.11.084CrossRefPubMed

58.

Grundke K, Pöschel K, Synytska A, Frenzel R, Drechsler A, Nitschke M, Cordeiro AL, Uhlmann P, Welzel PB (2015) Experimental studies of contact angle hysteresis phenomena on polymer surfaces—toward the understanding and control of wettability for different applications. Adv Colloid Interface Sci 222:350–376. https://doi.org/10.1016/j.cis.2014.10.012CrossRefPubMed

59.

de Gennes PG (1985) Wetting: statics and dynamics. Rev Mod Phys 57:827–863. https://doi.org/10.1103/RevModPhys.57.827CrossRef

60.

da Silva CG, Monteiro JR, Oshiro-Júnior JA, Chiavacci LA (2023) Hybrid membranes of the ureasil-polyether containing glucose for future application in bone regeneration. Pharmaceutics 15:1474. https://doi.org/10.3390/pharmaceutics15051474CrossRefPubMedPubMedCentral

61.

Korsmeyer RW, Gurny R, Doelker E, Buri P, Peppas NA (1983) Mechanisms of solute release from porous hydrophilic polymers. Int J Pharm 15:25–35. https://doi.org/10.1016/0378-5173(83)90064-9CrossRef

62.

Siepmann J, Peppas NA (2011) Higuchi equation: derivation, applications, use and misuse. Int J Pharm 418:6–12. https://doi.org/10.1016/j.ijpharm.2011.03.051CrossRefPubMed

63.

Pourtalebi Jahromi L, Ghazali M, Ashrafi H, Azadi A (2020) A comparison of models for the analysis of the kinetics of drug release from PLGA-based nanoparticles. Heliyon 6:e03451. https://doi.org/10.1016/j.heliyon.2020.e03451CrossRefPubMedPubMedCentral

64.

Papadopoulou V, Kosmidis K, Vlachou M, Macheras P (2006) On the use of the Weibull function for the discernment of drug release mechanisms. Int J Pharm 309:44–50. https://doi.org/10.1016/j.ijpharm.2005.10.044CrossRefPubMed

Titel: Modified release of D-glucose incorporated into laponite/ureasil–poly(ethylene oxide) hybrid nanocomposite
verfasst von: Naara Felipe da Fonsêca
José de Oliveira Alves-Júnior
Genil Dantas de Oliveira
Kammila Martins Nicolau Costa
Demis Ferreira de Melo
Pedro José Rolim Neto
Meiry Gláucia Freire Rodrigues
João Augusto Oshiro-Junior
Publikationsdatum: 10.05.2024
Verlag: Springer US
Erschienen in: Journal of Sol-Gel Science and Technology
Print ISSN: 0928-0707
Elektronische ISSN: 1573-4846
DOI: https://doi.org/10.1007/s10971-024-06387-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht