nach oben

Erschienen in:

24.02.2022

Research on the Reversible and Irreversible Heat Generation of LiNi_1−x−yCo_xMn_yO₂-Based Lithium-Ion Batteries

verfasst von: Qiaoping Zhang, Fanglin Wei, Peng Zhang, Ruize Dong, Jiaxin Li, Pengzhao Li, Qiurong Jia, Yanxia Liu, Jing Mao, Guosheng Shao

Erschienen in: Fire Technology | Ausgabe 3/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Accidents involving fires and explosions caused by lithium-ion battery thermal runaway have severely hampered the development of electric vehicles. With the purpose of improving the safety of battery operation and avoiding thermal runaway of lithium-ion batteries. This work conducts a full-scale heat generation quantitative test of two types of LiNi_1−x−yCo_xMn_yO₂-based commercial batteries by measuring the voltage-temperature coefficient (dE/dT) and the overpotential using the galvanostatic intermittent titration technique (GITT). Results indicate that that the heat generation rates of the two types of batteries exhibit similar trends. Battery heat generation is a function of C-rate, temperature and state of charge. Among them, C-rate is the most important influencing factor. The reversible heat contribution is the most significant at higher temperatures and lower C-rates. In most cases, the irreversible heat accounts for the dominant contribution to the total heat generation. The contribution of heat generation due to mass transport limitation is dominant among irreversible heat, and it is more significantly affected by temperature and state of charge, whereas the ohmic contribution shows a minor impact. The detailed analysis of the reversible and irreversible heat generation can provide effective theoretical guidance for safety warning and fire protection of lithium-ion battery systems, minimize the probability of the risk of fire accidents of the lithium-ion battery.

Vorheriger Artikel Special Issue on Lithium Battery Fire Safety

Nächster Artikel Thermal Runaway and Fire Behaviors of Lithium Iron Phosphate Battery Induced by Overheating and Overcharging

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Bandhauer TM, Garimella S, Fuller TF (2014) Temperature-dependent electrochemical heat generation in a commercial lithium-ion battery. J Power Sources 247:618–628. https://doi.org/10.1016/j.jpowsour.2013.08.015CrossRef

Liu K, Li K, Peng Q, Zhang C (2018) A brief review on key technologies in the battery management system of electric vehicles. Front Mech Eng 14(1):47–64. https://doi.org/10.1007/s11465-018-0516-8CrossRef

Rezaei A, Burl JB, Zhou B (2018) Estimation of the ECMS equivalent factor bounds for hybrid electric vehicles. IEEE Trans Control Syst Technol 26(6):2198–2205CrossRef

Plötz P, Funke SÁ, Jochem P (2018) Empirical fuel consumption and CO₂ emissions of plug-in hybrid electric vehicles. J Ind Ecol 22(4):773–784CrossRef

Xia L, Miao H, Wang F, Zhang C, Wang J, Zhao J, Yuan J (2021) Investigation of fluorinated ether-containing electrolytes for high energy-density nickel-rich LiNi_0.8Co_0.1Mn_0.1O₂ electrodes. Int J Energy Res 45(7):9936–9947. https://doi.org/10.1002/er.6488CrossRef

Liu X, Ren D, Hsu H, Feng X, Xu G-L, Zhuang M, Gao H, Lu L, Han X, Chu Z, Li J, He X, Amine K, Ouyang M (2018) Thermal runaway of lithium-ion batteries without internal short circuit. Joule 2(10):2047–2064. https://doi.org/10.1016/j.joule.2018.06.015CrossRef

Feng XN, Ouyang MG, Liu X, Lu LG, Xia Y, He XM (2018) Thermal runaway mechanism of lithium ion battery for electric vehicles: a review. Energy Storage Mater 10:246–267. https://doi.org/10.1016/j.ensm.2017.05.013CrossRef

Lopez CF, Jeevarajan JA, Mukherjee PP (2015) Experimental analysis of thermal runaway and propagation in lithium-ion battery modules. J Electrochem Soc 162(9):A1905–A1915. https://doi.org/10.1149/2.0461809jesCrossRef

Feng X, Zheng S, Ren D, He X, Wang L, Cui H, Liu X, Jin C, Zhang F, Xu C, Hsu H, Gao S, Chen T, Li Y, Wang T, Wang H, Li M, Ouyang M (2019) Investigating the thermal runaway mechanisms of lithium-ion batteries based on thermal analysis database. Appl Energy 246:53–64. https://doi.org/10.1016/j.apenergy.2019.04.009CrossRef

10.

Hu Z, He X, Restuccia F, Rein G (2020) Numerical study of self-heating ignition of a box of lithium-ion batteries during storage. Fire Technol 56(6):2603–2621. https://doi.org/10.1007/s10694-020-00998-8CrossRef

11.

Li H, Peng W, Yang X, Chen H, Sun J, Wang Q (2020) Full-scale experimental study on the combustion behavior of lithium ion battery pack used for electric vehicle. Fire Technol 56(6):2545–2564. https://doi.org/10.1007/s10694-020-00988-wCrossRef

12.

Liang C, Jiang L, Wang Q, Sun J (2020) Dynamic heat generation of LiNi_0.5Co_0.2Mn_0.3O₂ half cell under cycling based on an in situ micro-calorimetry. Fire Technol 56(6):2387–2404. https://doi.org/10.1007/s10694-020-00956-4CrossRef

13.

Sun P, Bisschop R, Niu H, Huang X (2020) A review of battery fires in electric vehicles. Fire Technol 56(4):1361–1410. https://doi.org/10.1007/s10694-019-00944-3CrossRef

14.

Wang Q, Wen J, Stoliarov S (2020) Special issue on lithium battery fire safety. Fire Technol 56(6):2345–2347. https://doi.org/10.1007/s10694-020-01048-zCrossRef

15.

Nagourney T, Jordan J, Marsh L, Scardino D, May BM (2021) The implications of post-fire physical features of cylindrical 18650 lithium-ion battery cells. Fire Technol 57(4):1707–1722. https://doi.org/10.1007/s10694-020-01077-8CrossRef

16.

Yan H, Marr KC, Ezekoye OA (2021) Towards fire forensic characteristics of failed cylindrical format lithium-ion cells and batteries. Fire Technol 57(4):1723–1752. https://doi.org/10.1007/s10694-020-01079-6CrossRef

17.

Bernardi D, Pawlikowski E, Newman J (1984) A general energy balance for battery systems. J Electrochem Soc 132(1):5–12. https://doi.org/10.1149/1.2113792CrossRef

18.

Thomas KE, Newman J (2003) Heats of mixing and of entropy in porous insertion electrodes. J Power Sources 119–121:844–849. https://doi.org/10.1016/S0378-7753(03)00283-0CrossRef

19.

Mao J, Tiedemann W, Newman J (2014) Simulation of temperature rise in Li-ion cells at very high currents. J Power Sources 271:444–454. https://doi.org/10.1016/j.jpowsour.2014.08.033CrossRef

20.

Feng X, Zheng S, Ren D, He X, Wang L, Liu X, Li M, Ouyang M (2019) Key characteristics for thermal runaway of Li-Ion batteries. Energy Procedia 158:4684–4689. https://doi.org/10.1016/j.egypro.2019.01.736CrossRef

21.

Liu P, Li Y, Mao B, Chen M, Huang Z, Wang Q (2021) Experimental study on thermal runaway and fire behaviors of large format lithium iron phosphate battery. Appl Therm Eng 192:116949–116961. https://doi.org/10.1016/j.applthermaleng.2021.116949CrossRef

22.

Huang Z, Li X, Wang Q, Duan Q, Li Y, Li L, Wang Q (2021) Experimental investigation on thermal runaway propagation of large format lithium ion battery modules with two cathodes. Int J Heat Mass Transf 172:121077–121090. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121077CrossRef

23.

Liu B, Jia Y, Yuan C, Wang L, Gao X, Yin S, Xu J (2020) Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: a review. Energy Storage Mater 24:85–112. https://doi.org/10.1016/j.ensm.2019.06.036CrossRef

24.

Liu B, Jia Y, Li J, Yin S, Yuan C, Hu Z, Wang L, Li Y, Xu J (2018) Safety issues caused by internal short circuits in lithium-ion batteries. J Mater Chem A 6(43):21475–21484. https://doi.org/10.1039/C8TA08997CCrossRef

25.

Lu WQ, Yang H, Prakash J (2006) Determination of the reversible and irreversible heats of LiNi_0.8Co_0.2O₂/mesocarbon microbead Li-ion cell reactions using isothermal microcalorimetery. Electrochim Acta 51(7):1322–1329CrossRef

26.

Jalkanen K, Aho T, Vuorilehto K (2013) Entropy change effects on the thermal behavior of a LiFePO₄/graphite lithium-ion cell at different states of charge. J Power Sources 243:354–360. https://doi.org/10.1016/j.jpowsour.2013.05.199CrossRef

27.

Viswanathan VV, Choi D, Wang D, Xu W, Towne S, Williford RE, Zhang J-G, Liu J, Yang Z (2010) Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management. J Power Sources 195(11):3720–3729. https://doi.org/10.1016/j.jpowsour.2009.11.103CrossRef

28.

Heubner C, Schneider M, Michaelis A (2016) Detailed study of heat generation in porous LiCoO₂ electrodes. J Power Sources 307:199–207. https://doi.org/10.1016/j.jpowsour.2015.12.096CrossRef

29.

Gunnarshaug AF, Vie PJS, Kjelstrup S (2021) Review—reversible heat effects in cells relevant for lithium-ion batteries. J Electrochem Soc 168(5):050522–050540. https://doi.org/10.1149/1945-7111/abfd73CrossRef

30.

Mao J, Zhang P, Liu X, Shao G, Dai K (2020) Entropy change characteristics of the LiNi_0.5Mn_1.5O₄ cathode material for lithium-ion batteries. ACS Omega 5:4109–4114CrossRef

31.

Bai Y, Li L, Li Y, Chen G, Zhao H, Wang Z, Wu C, Ma H, Wang X, Cui H, Zhou J (2019) Reversible and irreversible heat generation of NCA/Si–C pouch cell during electrochemical energy-storage process. J Energy Chem 29:95–102. https://doi.org/10.1016/j.jechem.2018.02.016CrossRef

32.

Liang C, Jiang L, Ye S, Wang Z, Wei Z, Wang Q, Sun J (2021) Precise in-situ and ex-situ study on thermal behavior of LiNi_1/3Co_1/3Mn_1/3O₂/graphite coin cell: from part to the whole cell. J Energy Chem 54:332–341. https://doi.org/10.1016/j.jechem.2020.06.008CrossRef

33.

Zhao W, Rohde M, Mohsin IU, Ziebert C, Seifert HJ (2020) Heat generation in NMC622 coin cells during electrochemical cycling: separation of reversible and irreversible heat effects. Batteries 6(4):55–66. https://doi.org/10.3390/batteries6040055CrossRef

34.

Lin CJ, Xu SC, Liu JL (2018) Measurement of heat generation in a 40 Ah LiFePO₄ prismatic battery using accelerating rate calorimetry. Int J Hydrogen Energy 43(17):8375–8384. https://doi.org/10.1016/j.ijhydene.2018.03.057CrossRef

35.

Bai Y, Li L, Li Y, Chen G, Zhao H, Wang Z, Wu C, Ma H, Wang X, Cui H, Zhou J (2019) Reversible and irreversible heat generation of NCA/Si–C pouch cell during electrochemical energy-storage process. J Energy Chem 29(02):95–102. https://doi.org/10.1016/j.jechem.2018.02.016CrossRef

36.

Cano ZP, Banham D, Ye S, Hintennach A, Lu J, Fowler M, Chen Z (2018) Batteries and fuel cells for emerging electric vehicle markets. Nat Energy 3(4):279–289CrossRef

37.

Needell ZA, McNerney J, Chang MT, Trancik JE (2016) Potential for widespread electrification of personal vehicle travel in the United States. Nat Energy 1(9):16112CrossRef

38.

Du S, Lai Y, Ai L, Ai L, Cheng Y, Tang Y, Jia M (2017) An investigation of irreversible heat generation in lithium ion batteries based on a thermo-electrochemical coupling method. Appl Therm Eng 121:501–510. https://doi.org/10.1016/j.applthermaleng.2017.04.077CrossRef

39.

Gu WB, Wang CY (2000) Thermal-electrochemical modeling of battery systems. J Electrochem Soc 147(8):2910–2922. https://doi.org/10.1149/1.1393625CrossRef

40.

Jalkanen K, Vuorilehto K (2015) Entropy change characteristics of LiMn_0.67Fe_0.33PO₄ and Li₄Ti₅O₁₂ electrode materials. J Power Sources 273:351–359. https://doi.org/10.1016/j.jpowsour.2014.09.091CrossRef

41.

Al Hallaj S, Maleki H, Hong JS, Selman JR (1999) Thermal modeling and design considerations of lithium-ion batteries. J Power Sources 83(1–2):1–8. https://doi.org/10.1016/S0378-7753(99)00178-0CrossRef

42.

Yang H, Prakash J (2004) Determination of the reversible and irreversible heats of a LiNi_0.8Co_0.15Al_0.05O₂/natural graphite cell using electrochemical-calorimetric technique. J Electrochem Soc 151(8):A1222–A1229. https://doi.org/10.1149/1.1765771CrossRef

43.

Heubner C, Schneider M, Michaelis A (2017) Heat generation rates of NaFePO₄ electrodes for sodium-ion batteries and LiFePO₄ electrodes for lithium-ion batteries: a comparative study. J Solid State Electrochem 22(4):1099–1108. https://doi.org/10.1007/s10008-017-3828-4CrossRef

44.

Wen CJ, Boukamp BA, Huggins RA, Weppner W (2019) Thermodynamic and mass transport properties of “ LiAl .” J Electrochem Soc 126(12):2258–2266. https://doi.org/10.1149/1.2128939CrossRef

45.

Xu X, Wang H, Lu S, Peng S, Xiang Y (2016) A phosphotungstic acid self-anchored hybrid proton exchange membrane for direct methanol fuel cells. RSC Adv 6(49):43049–43055. https://doi.org/10.1039/C6RA07318BCrossRef

46.

Li X, Zhang J, Shen L, Ma Y, Lei W, Cui Q, Zou G (2008) Preparation and characterization of graphitic carbon nitride through pyrolysis of melamine. Appl Phys A 94(2):387–392. https://doi.org/10.1007/s00339-008-4816-4CrossRef

47.

Reimers JN, Dahn JR (1992) Electrochemical and in situ x-ray diffraction studies of lithium intercalation in Li_xCoO₂. J Electrochem Soc 139(8):2091–2097. https://doi.org/10.1149/1.2221184CrossRef

48.

Liebmann T, Heubner C, Schneider M, Michaelis A (2018) Investigations on the reversible heat generation rates of blended Li-insertion electrodes. J Solid State Electrochem 23(1):245–250. https://doi.org/10.1007/s10008-018-4127-4CrossRef

49.

Zhang Q, White RE (2007) Moving boundary model for the discharge of a LiCoO₂ electrode. J Electrochem Soc 154(6):A587–A596. https://doi.org/10.1149/1.2837302CrossRef

50.

Nara H, Mukoyama D, Yokoshima T, Momma T, Osaka T (2015) Impedance analysis with transmission line model for reaction distribution in a pouch type lithium-ion battery by using micro reference electrode. J Electrochem Soc 163(3):A434–A441. https://doi.org/10.1149/2.0341603jesCrossRef

51.

Cao C, Abate II, Sivonxay E, Shyam B, Jia C, Moritz B, Devereaux TP, Persson KA, Steinrück H-G, Toney MF (2019) Solid electrolyte interphase on native oxide-terminated silicon anodes for li-ion batteries. Joule 3(3):762–781. https://doi.org/10.1016/j.joule.2018.12.013CrossRef

52.

Yang X-G, Liu T, Gao Y, Ge S, Leng Y, Wang D, Wang C-Y (2019) Asymmetric temperature modulation for extreme fast charging of lithium-ion batteries. Joule 3(12):3002–3019. https://doi.org/10.1016/j.joule.2019.09.021CrossRef

Titel: Research on the Reversible and Irreversible Heat Generation of LiNi1−x−yCoxMnyO2-Based Lithium-Ion Batteries
verfasst von: Qiaoping Zhang
Fanglin Wei
Peng Zhang
Ruize Dong
Jiaxin Li
Pengzhao Li
Qiurong Jia
Yanxia Liu
Jing Mao
Guosheng Shao
Publikationsdatum: 24.02.2022
Verlag: Springer US
Erschienen in: Fire Technology / Ausgabe 3/2023
Print ISSN: 0015-2684
Elektronische ISSN: 1572-8099
DOI: https://doi.org/10.1007/s10694-022-01220-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2023

Lithium-Ion Battery Thermal Runaway Propagation Characteristics Under 20 kPa with Different Airflow Rates

An Experimental Study on Fire Suppression Devices for Power Batteries of Hybrid Electric Multiple Units

A LiFePO4 Based Semi-solid Lithium Slurry Battery for Energy Storage and a Preliminary Assessment of Its Fire Safety

Thermal Runaway and Fire Behaviors of Lithium Iron Phosphate Battery Induced by Overheating and Overcharging

Numerical Study on Lithium-Ion Battery Thermal Runaway Under Fire Conditions

Benchmarking Between COMSOL and GPYRO in Predicting Self-Heating Ignition of Lithium-Ion Batteries