nach oben

Fire Technology

Erschienen in:

06.11.2022

Study on the Reversible and Irreversible Heat Generation of the Lithium-Ion Battery with LiFePO₄ Cathode

verfasst von: Weiwei Shao, Beibei Zhao, Wenjuan Zhang, Yan Feng, Wenfeng Mao, Guo Ai, Kehua Dai

Erschienen in: Fire Technology | Ausgabe 2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The study of reversible and irreversible heat generation of lithium-ion batteries at different C rates is important for designing thermal management system. Galvanostatic intermittent titration technique is used to determine the overpotential of different SOC (state of charge) or SOD (state of discharge) of commercial lithium iron phosphate pouch cells. The reversible and irreversible heat generation of the battery is calculated based on the entropy change and overpotential. It is found that when the lithium iron phosphate battery is charged, reversible heat first manifests itself as heat absorption, and then soon as exotherm after around 30% SOC, while the reverse for discharge. The total heat generation of lithium iron phosphate batteries during charging is higher than that during discharging. The relative contribution of irreversible and reversible heat generation at low and high rates are different. At 0.1 C rate, the maximum proportion of q_rev is about 70%, while at 1 C rate, the maximum proportion of q_rev is about 25%.

Vorheriger Artikel A Closed-Form Solution of the Smoke Filling Time and Descent History in Enclosure Growing Fires with Floor Leaks

Nächster Artikel Calculation Method of the Residual Bearing Capacities of Concrete T-Shaped Beams Considering the Effect of Fire Cracks

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Scrosati B, Garche J (2010) Lithium batteries: status, prospects and future. J Power Sources 195(9):2419–2430. https://doi.org/10.1016/j.jpowsour.2009.11.048CrossRef

Feng X, Ouyang M, Liu X et al (2018) Thermal runaway mechanism of lithium ion battery for electric vehicles: a review. Energy Storage Mater 10:246–267. https://doi.org/10.1016/j.ensm.2017.05.013CrossRef

Wang B, Ji CW, Wang SF et al (2020) A detailed finite element model of internal short circuit and venting during thermal runaway in a 32650 lithium-ion battery. Fire Technol 56:2525–2544. https://doi.org/10.1007/s10694-020-00978-yCrossRef

Li H, Peng W, Yang XL et al (2020) Full-scale experimental study on the combustion behavior of lithium ion battery pack used for electric vehicle. Fire Technol 56:2545–2564. https://doi.org/10.1007/s10694-020-00988-wCrossRef

Wang QS, Ping P, Zhao XJ et al (2012) Thermal runaway caused fire and explosion of lithium ion battery. J Power Sources 208:210–224. https://doi.org/10.1016/j.jpowsour.2012.02.038CrossRef

Zhang QP, Wei FL, Zhang P et al (2022) Research on the reversible and irreversible heat generation of LiNi_1−x−yCo_xMn_yO₂-based lithium-ion batteries. Fire Technol. https://doi.org/10.1007/s10694-022-01220-7CrossRef

Lai YQ, Du SL, Ai L et al (2015) Insight into heat generation of lithium ion batteries based on the electrochemical-thermal model at high discharge rates. Int J Hydrogen Energy 40(38):13039–13049. https://doi.org/10.1016/j.ijhydene.2015.07.079CrossRef

Kim US, Yi J, Shin C et al (2011) Modelling the thermal behaviour of a lithium-ion battery during charge. J Power Sources 196(11):5115–5121. https://doi.org/10.1016/j.jpowsour.2011.01.103CrossRef

Zhang X, Chang X, Shen Y et al (2017) Electrochemical-electrical-thermal modeling of a pouch-type lithium ion battery: an application to optimize temperature distribution. J Energy Storage 11:249–257. https://doi.org/10.1016/j.est.2017.03.008CrossRef

10.

Li K, Xie YC, Xie Y et al (2021) Analysis of heat production of nickel-rich lithium-ion battery based on electrochemical thermal coupling model. Energy Storage Sci Technol 10(3):1153–1162. https://doi.org/10.19799/j.cnki.2095-4239.2021.0009CrossRef

11.

Li W, Xie Y, Zhang YJ et al (2020) A dynamic electro-thermal coupled model for temperature prediction of a prismatic battery considering multiple variables. Int J Energy Res. https://doi.org/10.1002/er.6087CrossRef

12.

Yang NX, Fu YH, Yue HY et al (2019) An improved semi-empirical model for thermal analysis of lithium-ion batteries. Electrochim Acta 311(10):8–20. https://doi.org/10.1016/j.electacta.2019.04.129CrossRef

13.

Cicconi P, Landi D, Germani M et al (2017) Thermal analysis and simulation of a li-ion battery pack for a lightweight commercial EV. Appl Energy 192(15):159–177. https://doi.org/10.1016/j.apenergy.2017.02.008CrossRef

14.

Rizk R, Louahlia H, Gualous H et al (2018) Experimental analysis and transient thermal modelling of a high capacity prismatic lithium-ion battery. Int Commun Heat Mass Trans 94:115–125. https://doi.org/10.1016/j.icheatmasstransfer.2018.03.018CrossRef

15.

Lei B, Zhao W, Ziebert C et al (2017) Experimental analysis of thermal runaway in 18650 cylindrical Li-ion cells using an accelerating rate calorimeter. Batteries 3(2):14. https://doi.org/10.3390/batteries3020014CrossRef

16.

Huang Z, Li H, Mei W et al (2020) Thermal runaway behavior of lithium iron phosphate battery during penetration. Fire Technol 56:2405–2426. https://doi.org/10.1007/s10694-020-00967-1CrossRef

17.

Madani SS, Schaltz E, Kær SK (2018) Study of temperature impacts on a lithium-ion battery thermal behaviour by employing isothermal calorimeter. ECS Trans 87(1):295–305. https://doi.org/10.1149/08701.0295ecstCrossRef

18.

Li H, Li F (2016) Determination of reversible and irreversible heat production of cylindrical li-ion cell during charge and discharge process. Chin J Power Sources 40(11):2128–2131

19.

Damay N, Forgez C, Bichat MP et al (2015) Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation. J Power Sources 283(1):37–45. https://doi.org/10.1016/j.jpowsour.2015.02.091CrossRef

20.

Lin CJ, Xu SC, Li Z et al (2015) Thermal analysis of large-capacity LiFePO₄ power batteries for electric vehicles. J Power Sources. https://doi.org/10.1016/j.jpowsour.2015.06.129CrossRef

21.

Panchal S, Dincer I, Agelin-Chaab M et al (2016) Experimental and simulated temperature variations in a LiFePO₄-20 Ah battery during discharge process. Appl Energy 180(15):504–515. https://doi.org/10.1016/j.apenergy.2016.08.008CrossRef

22.

Heubner C, Schneider M, Michaelis A (2016) Detailed study of heat generation in porous LiCoO₂ electrodes. J Power Sources 307:199–207. https://doi.org/10.1016/j.jpowsour.2015.12.096CrossRef

23.

Liu ZH, Wang C, Guo XM et al (2021) Thermal characteristics of ultrahigh power density lithium-ion battery. J Power Sources. https://doi.org/10.1016/j.jpowsour.2021.230205CrossRef

24.

Heubner C, Schneider M, Lämmel C et al (2015) Local heat generation in a single stack lithium ion battery cell. Electrochim Acta 186:404–412. https://doi.org/10.1016/j.electacta.2015.10.182CrossRef

25.

Schmidt JP, Weber A, Ivers-Tiffée E et al (2014) A novel and precise measuring method for the entropy of lithium-ion cells:∆S via electrothermal impedance spectroscopy. Electrochim Acta. https://doi.org/10.1016/j.electacta.2014.05.153CrossRef

26.

Jalkanen K, Aho T, Vuorilehto K (2013) Entropy change effects on the thermal behavior of a LiFePO₄/graphite lithium-ion cell at different states of charge. J Power Sources 243:354–360. https://doi.org/10.1016/j.jpowsour.2013.05.199CrossRef

27.

Wei F, Li P, Zhang Q et al (2022) Entropy change characteristics for sodium ion half/full cells based on Na₃V₂(PO₄)₃ and hard carbon materials. J Electrochem Soc. https://doi.org/10.1149/1945-7111/ac6a14/metaCrossRef

28.

Mao J, Zhang P, Liu X et al (2020) Entropy change characteristics of the LiNi_0.5Mn_1.5O₄ cathode material for lithium-ion batteries. ACS Omega 5(8):4109–4114. https://doi.org/10.1021/acsomega.9b03794CrossRef

29.

Heubner C, Schneider M, Michaelis A et al (2017) Heat generation rates of NaFePO₄ electrodes for sodium-ion batteries and LiFePO₄ electrodes for lithium-ion batteries: a comparative study. J Solid State Electrochem 22(4):1099–1108. https://doi.org/10.1007/s10008-017-3828-4CrossRef

30.

Liebmann T, Heubner C, Schneider M et al (2019) Investigations on the reversible heat generation rates of blended Li-insertion electrodes. J Solid State Electrochem 23:245–250. https://doi.org/10.1007/s10008-018-4127-4CrossRef

31.

Mao J, Liu X, Liu JW et al (2019) P2-type Na_2/3Ni_1/3Mn_2/3O₂ cathode material with excellent rate and cycling performance for sodium-ion batteries. J Electrochem Soc 166(16):A3980–A3986. https://doi.org/10.1149/2.0211916jesCrossRef

32.

Li Y, Li TQ, Qin JH et al (2021) Study on the heat generation mechanism of 18650 LiFePO₄ battery under different discharge rates. Chin J Power Sources 45(08):1001–1004. https://doi.org/10.3969/j.issn.1002-087X.2021.08.011CrossRef

33.

Ma Y, Zhang L, Wang YW et al (2021) Thermal-safety characteristics of LiFePO₄ Li-ion battery for energy storage. Battery Bimon 51(01):41–45. https://doi.org/10.19535/j.1001-1579.2021.01.011CrossRef

34.

Khalid Z, Hasna L, Rafaele P et al (2021) Experimental investigation on the impact of the battery charging/discharging current ratio on the operating temperature and heat generation. Int J Energy Res 45(11):16754–16768. https://doi.org/10.1002/er.6923CrossRef

35.

Li J, Cheng Y, Jia M et al (2014) An electrochemical–thermal model based on dynamic responses for lithium iron phosphate battery. J Power Sources 255:130–143. https://doi.org/10.1016/j.jpowsour.2014.01.007CrossRef

Titel: Study on the Reversible and Irreversible Heat Generation of the Lithium-Ion Battery with LiFePO4 Cathode
verfasst von: Weiwei Shao
Beibei Zhao
Wenjuan Zhang
Yan Feng
Wenfeng Mao
Guo Ai
Kehua Dai
Publikationsdatum: 06.11.2022
Verlag: Springer US
Erschienen in: Fire Technology / Ausgabe 2/2023
Print ISSN: 0015-2684
Elektronische ISSN: 1572-8099
DOI: https://doi.org/10.1007/s10694-022-01325-z

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 2/2023

Study on the Blocking Effect of Aerogel Felt Thickness on Thermal Runaway Propagation of Lithium-Ion Batteries

Fire and Smoke Detection Using Capsule Network

Predicting and Assessing Wildfire Evacuation Decision-Making Using Machine Learning: Findings from the 2019 Kincade Fire

Hybrid Ensemble Based Machine Learning for Smart Building Fire Detection Using Multi Modal Sensor Data

Comprehensive Failure Analysis in Tehran Refinery Fire Accident: Application of Accimap Methodology and Quantitative Domino Effect Analysis

Field Experimental Investigations on the Performance of an Environmentally Friendly Soap-Based Firefighting Agent on Indonesian Peat Fire