nach oben

European Journal of Wood and Wood Products

Erschienen in:

10.02.2023 | Original Article

The use of enzymatic pre-treatment to facilitate and reduce the energy consumption of unbleached cellulose micro/nanofibrils production from Eucalyptus spp. and Pinus spp. kraft pulps

verfasst von: Allan de Amorim dos Santos, Maryella Júnnia Ferreira e Silva, Luiz Eduardo Silva, Maressa Carvalho Mendonça, Renato Augusto Pereira Damásio, Gustavo Henrique Denzin Tonoli

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Cellulose micro/nanofibrils have gained prominence due to their structure, which is composed of crystalline and amorphous regions, and varying extraction approaches can generate different micro/nanofibrils morphology and structure. This work aimed to evaluate the application of endoglucanase enzyme in different types of unbleached cellulosic pulps as a pre-treatment to reduce energy consumption in mechanical fibrillation. Chemical, morphological and mechanical properties of fibers and micro/nanofibrils pre-treated with and without enzyme were evaluated. Kraft pulps from Eucalyptus spp. and Pinus spp. were dispersed in water (3% w/w) and pre-treated with enzyme A, enzyme B, and without enzyme, as a control. The pulps were rinsed, resuspended (2% w/w,) and submitted to mechanical extraction by 5 cycles through a grinder, recording the energy consumption. Results indicated that the chemical and compositional characteristics of all pulps have not been affected by the enzymatic pre-treatment. There was an increase in water stability and a decrease in the mean diameter of the micro/nanofibrils. The tensile strength of the films also increased with increasing grinding cycles. All kraft pulps pre-treated with enzymes A and B showed a decrease in energy consumption, with up to 44% of energy savings in Eucalyptus spp. kraft pulp while 67% for Pinus spp. Thus, the enzymatic pre-treatment proved to be a sustainable alternative for cellulose nanofibril extraction, generating well-fibrillated micro/nanofibrils at low energy consumption.

Vorheriger Artikel Response surface methodology approach for dyeing process optimization of Ayous (Triplochiton scleroxylon) wood with acid dye

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Aguiar J, Bondancia TJ, Claro PIC, Mattoso LHC, Farinas CS, Marconcini JM (2020) Enzymatic deconstruction of sugarcane bagasse and straw to obtain cellulose nanomaterials. ACS Sustain Chem Eng 8(5):2287–2299. https://doi.org/10.1021/acssuschemeng.9b06806CrossRef

Ankerfors M (2015) Microfibrillated cellulose: energy-efficient preparation techniques and applications in the paper. Doctoral dissertation, KTH Royal Institute of Technology

Arantes V, Gourlay K, Saddler JN (2014) The enzymatic hydrolysis of pretreated pulp fibers predominantly involves “peeling/erosion” modes of action. Biotechnol Biofuels 7:87. https://doi.org/10.1186/1754-6834-7-87CrossRefPubMedPubMedCentral

ASTM (2016) ASTM D828-16: Standard Test Method for Tensile Properties of Paper and Paperboard using constant rate of Elongation Apparatus. American Society For Testing And Materials, Philadelphia

Banvillet G, Depres G, Belgacem N, Bras J (2021a) Alkaline treatment combined with enzymatic hydrolysis for efficient cellulose micro/nanofibrils production. Carbohydr Polym 255:117383. https://doi.org/10.1016/j.carbpol.2020.117383CrossRefPubMed

Banvillet G, Gatt E, Belgacem N, Bras J (2021b) Cellulose fibers deconstruction by twin-screw extrusion with in situ enzymatic hydrolysis via bioextrusion. Bioresour Technol 327:124819. https://doi.org/10.1016/j.biortech.2021.124819CrossRefPubMed

Berlin A, Balakshin M, Gilkes N, Kadla J, Mazimenko V, Kubo S, Saddler J (2006) Inhibition of cellulase, xylanase and β-glucosidase activities by softwood lignin preparations. J Biotechnol 125:198–209. https://doi.org/10.1016/j.jbiotec.2006.02.021CrossRefPubMed

Bian H, Chen L, Dong M, Fu Y, Wang R, Zhou X, Wang X, Xu J, Dai H (2020) Cleaner production of lignocellulosic micro/nanofibrils: potential of mixed enzymatic treatment. J Clean Prod 270:122506. https://doi.org/10.1016/j.jclepro.2020.122506CrossRef

Bian H, Chen L, Wang R, Zhu J (2017) Green and low-cost production of thermally stable and carboxylated cellulose nanocrystals and micro/nanofibrils using highly recyclable dicarboxylic acids. J Vis Exp 119:55079. https://doi.org/10.3791/55079CrossRef

Bian H, Dong M, Chen L, Zhou X, Ni S, Fang G, Dai H (2019) Comparison of mixed enzymatic pretreatment and post-treatment for enhancing the cellulose nanofibrillation efficiency. https://doi.org/10.1016/j.biortech.2019.122171. Bioresour technol 122171

Bufalino L, Mendes LM, Tonoli GHD, Rodrigues A, Fonseca A, Cunha PI, Marconcini JM (2014) New products made with lignocellulosic nanofibers from Brazilian amazon forest. IOP Conference Series: Mat Scien Eng 64:1–5, 2nd International Conference on Structural Nano Composites (NANOSTRUC 2014) 20–21 May 2014, Madrid

Burger LM, Richter HG (1991) Anatomia da madeira [Wood anatomy]. Nobel, São Paulo

Cao Y, Tan H (2005) Study on crystal structures of enzyme-hydrolyzed cellulosic materials by X-ray diffraction. Enzyme Microb Technol v 36:314–317. https://doi.org/10.1016/j.enzmictec.2004.09.002GetCrossRef

Chen H, Wang X, Bozell JJ et al (2019) Effect of solvent fractionation pretreatment on energy consumption of cellulose nanofabrication from switchgrass. J Mater Sci 54:8010–8022. https://doi.org/10.1007/s10853-019-03413-yCrossRef

Chen Y, Fan D, Han Y et al (2017a) Length-controlled cellulose micro/nanofibrils produced using enzyme pretreatment and grinding. Cellulose 24:5431–5442. https://doi.org/10.1007/s10570-017-1499-zCrossRef

Chen Y, He Y, Fan D, Han Y, Li G, Wang S (2017b) An Efficient Method for Cellulose Micro/nanofibrils Length Shearing via Environmentally Friendly Mixed Cellulase Pretreatment. J Nanomater 2017: 1591504. https://doi.org/10.1155/2017/1591504

Chung DDL (2005) Dispersion of short fibers in cement. J Mater Civil Eng 17:379–383CrossRef

Costa THF, Masarin F, Bonifácio TO, Milagres AMF, Ferraz A (2013) The enzymatic recalcitrance of internodes of sugar cane hybrids with contrasting lignin contents. Ind Crops Prod 51:202–211. https://doi.org/10.1016/j.indcrop.2013.08.078CrossRef

Dias MC, Mendonça MC, Damásio RAP et al (2019) Influence of hemicellulose content of Eucalyptus and Pinus fibers on the grinding process for obtaining cellulose micro/micro/nanofibrils. Holzforschung 73:1035–1046. https://doi.org/10.1515/hf-2018-0230CrossRef

Dos Santos AA, Silva MJF, Scatolino MV, Durães AFS, Dias MC, Damásio RAP, Tonoli GHD (2022) Comparison of pre–treatments mediated by endoglucanase and TEMPO oxidation for eco–friendly low–cost energy production of cellulose micro/nanofibrils. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-022-22575-yCrossRef

Durães AF, Moulin AFS, Santos AA, Ferreira e Silva MJ, Damásio RAP, Tonoli GHD (2021) Optimization of cellulose nanofibril production under enzymatic pretreatment and evaluation of dislocations in plant fibers. Fibers Polym 22(7):1810–1821. https://doi.org/10.1007/s12221-21-0810-7CrossRef

Fardim P, Durán N (2003) Modification of fibre surfaces during pulping and refining as analysed by SEM, XPS, and ToF-SIMS. Colloids Surf A 223:263–276. https://doi.org/10.1016/S0927-7757(03)00149-3CrossRef

Fonseca AS, Panthapulakkal S, Konar SK, Sain M, Bufalino L, Raabe J, Miranda IPA, Martins MA, Tonoli GHD (2019) Improving cellulose nanofibrillation of non-wood fiber using alkaline and bleaching pre-treatments. Ind Crops Prod 131:203–212. https://doi.org/10.1016/j.indcrop.2019.01.046CrossRef

French AD (2020) Increment in evolution of cellulose crystallinity analysis. Cellulose 27:5445–5448. https://doi.org/10.1007/s10570-020-03172-zCrossRef

Glória GO, Teles MCA, Lopes FPDL, Vieira CMFV, Margem FMM, Gomes MAG, Monteiro SN (2017) Tensile strength of polyester composites reinforced with PALF. J Mater Res Technol 6:401–405. https://doi.org/10.1016/j.jmrt.2017.08.006CrossRef

Goldschmid O (1971) Ultraviolet spectra. In: Sarkanen KV, Ludwig CH. Lignins: occurrence, formation, structure and reactions. 241–266. New York: John Wiley & Sons

Gomide JL, Demuner BJ (1986) Determinação do teor de lignina em material lenhoso: método Klason modificado [Determination of lignin content in woody material: modified klason method]. Papel 47:36–38

Guimarães Junior M, Botaro VR, Novack KM, Neto WPF, Mendes LM, Tonoli GHD (2015) Preparation of Cellulose Micro/nanofibrils from Bamboo Pulp by Mechanical Fibrillation for their applications in Biodegradable Composites. J Nanosci Nanotechnol 15:1–18. https://doi.org/10.1166/jnn.2015.10854CrossRef

Gunawardhana T, Banham P, Richardson DE, Patti A, Batchelor W (2017) Upgrading waste whitewater fines from a Pinus radiata thermomechanical pulping mill. Nord Pulp Pap Res J 32(4):656–665. https://doi.org/10.3183/npprj-2017-32-04_p656-665_batchelorCrossRef

Gupta R, Lee Y (2009) Mechanism of cellulase reaction on pure cellulosic substrates. Biotechnol Bioeng 102:1570–1581. https://doi.org/10.1002/bit.22195CrossRefPubMed

Han X, Bi R, Khatri V, Oguzlu H, Takada M, Jiang J, Jiang F, Bao J, Saddler JN (2021) Use of endoglucanase and accessory enzymes to facilitate Mechanical Pulp Nanofibrillation. ACS Sustain Chem Eng 9(3):1406–1413. https://doi.org/10.1021/acssuschemeng.0c08588CrossRef

He M, Yang G, Chen J, Ji X, Wang Q (2018) Production and characterization of cellulose micro/nanofibrils from different chemical and mechanical pulps. J Wood Chem Technol 38:149–158CrossRef

Henniges U, Veigel S, Lems EM et al (2014) Microfibrillated cellulose and cellulose nanopaper from Miscanthus biogas production residue. Cellulose 21:1601–1610. https://doi.org/10.1007/s10570-014-0232-4CrossRef

Henriksson M, Henriksson M, Henriksson G, Berglund LA, Lindström T (2007) An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibrils. Eur Polym J 43(8):3434–3441. https://doi.org/10.1016/j.eurpolymj.2007.05.038CrossRef

Horn SJ, Vaaje-Kolstad G, Wetteng B, Eijsink VGH (2012) Novel enzymes for the degradation of cellulose. Biotechnol Biofuels 5(45). https://doi.org/10.1186/1754-6834-5-45

Hu J, Tian D, Renneckar S, Saddler JN (2018) Enzyme mediated nanofibrillation of cellulose by the synergistic actions of an endoglucanase, lytic polysaccharide monooxygenase (LPMO) and xylanase. Sci Rep 2018, 8 (1), 3195. https://doi.org/10.1038/s41598-018-21016-6

Hu F, Zeng J, Cheng Z, Wang X, Wang B, Zeng Z, Chen K (2021) Cellulose micro/nanofibrils (CNFs) produced by different mechanical methods to improve mechanical properties of recycled paper. Carbohydr Polym 254:117474. https://doi.org/10.1016/j.carbpol.2020.117474CrossRefPubMed

Iwamoto S, Nakagaito AN, Yano H (2007) Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites. Appl Phys A 89:461–466. https://doi.org/10.1007/s00339-007-4175-6CrossRef

Li X, Clarke K, Li K, Chen A (2012) The pattern of cell wall deterioration in lignocellulose fibers throughout enzymatic cellulose hydrolysis. Biotechnol Prog 28:1389–1399. https://doi.org/10.1002/btpr.1613CrossRefPubMed

Liu W, Du H, Liu K, Liu H, Xie H, Si C, Pang B, Zhang X (2021) Sustainable preparation of cellulose micro/nanofibrils via choline chloride-citric acid deep eutectic solvent pretreatment combined with high-pressure homogenization. Carbohydr Polym 267:118220. https://doi.org/10.1016/j.carbpol.2021.118220CrossRefPubMed

Long L, Tian D, Hu J, Wang F, Saddler J (2017) A xylanase-aided enzymatic pretreatment facilitates cellulose nanofibrillation. Bioresour technol 2017, 243, 898–904. https://doi.org/10.1016/j.biortech.2017.07.037

Lopes TA, Bufalino L, Júnior MG, Tonoli GHD, Mendes LM (2018) Eucalyptus wood micro/nanofibrils as reinforcement of carrageenan and starch biopolymers for improvement of physical properties. J Trop For Sci 30(3):292–303. https://doi.org/10.26525/jtfs2018.30.3.292303CrossRef

Martins CCN, Dias MC, Mendonça MC, Durães AFS, Félix JR, Damásio RAP, Tonoli GHD (2021) Optimizing cellulose microfibrillation with NaOH pretreatments for unbleached Eucalyptus pulp. Cellulose 1–13. https://doi.org/10.21203/rs.3.rs-411630/v1

Matos LC, Rompa VD, Damásio RAP, Marconcini JM, Tonoli GHD (2019) Incorporação de Nanomateriais e emulsão de ceras no desenvolvimento de papéis multicamadas [Incorporation of nanomaterials and wax emulsion in the development of multilayer papers]. Sci For 47(122):1–15. https://doi.org/10.18671/scifor.v47n122.01CrossRef

Mendonça MC, Dias MC, Martins CCN, Durães AFS, Damásio RAP, Tonoli GHD (2022) Alkaline pretreatment facilitate mechanical fibrillation of unbleached cellulose pulps for obtaining of cellulose micro/nanofibrils (mfc). J Nat Fibers 1–16. https://doi.org/10.1080/15440478.2022.2092252

McKee J, Hietalat S, Seitsonen J, Laine J, Kontturi E, Ikkala O (2014) Thermoresponsive nanocellulose hydrogels with tunable mechanical properties. ACS Macro Lett 3(3):266–270. https://doi.org/10.1021/mz400596gCrossRefPubMed

Moulin JC, Durães AFS, Dias MC, Silva LE, Santos AA, Damásio RAP, Ugucioni JC, Tonoli GHD (2021) Evaluation of changes in cellulose micro/micro/nanofibrils structure under chemical and enzymatic pre-treatments. Holzforschung, vol. 75, no. 11, 2021, pp. 1042–1051. https://doi.org/10.1515/hf-2020-0231

Nie S, Zhang K, Lin X, Zhang C, Yan D, Liang H, Wang S (2018) Enzymatic pretreatment for the improvement of dispersion and film properties of cellulose micro/nanofibrils. Carbohydr Polym 181:1136–1142. https://doi.org/10.1016/j.carbpol.2017.11.020CrossRefPubMed

Pennells J, Cruickshank A, Chaleat C, Godwin ID, Martin DJ (2021) Sorghum as a novel biomass for the sustainable production of cellulose nanofibers. Ind Crops Prod 171:113917. https://doi.org/10.1016/j.indcrop.2021.113917CrossRef

Pérez S, Samain D (2010) Structure and Engineering of Celluloses. Adv Carbohydr Chem Biochem 64:25–116. https://doi.org/10.1016/S0065-2318(10)64003-6CrossRefPubMed

Perumal AB, Nambiar RB, Sellamuthu PS, Sadiku ER, Li X, He Y (2022) Extraction of cellulose nanocrystals from areca waste and its application in eco-friendly biocomposite film. Chemosphere 287:132084. https://doi.org/10.1016/j.chemosphere.2021.132084CrossRefPubMed

Pääkkö M, Ankerfors M, Kosonen H, Nykänen A, Ahola S, Österberg M, Ruokolainen J, Laine J, Larsson PT, Ikkala O, Lindström T (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for Nanoscale cellulose fibrils and strong gels. Biomacromolecules 8:1934–1941. https://doi.org/10.1021/bm061215pCrossRefPubMed

Ribes DD, Zanatta P, Gatto DA, Magalhães WLE, Beltrame R (2018) Produção de suspensão nanofibrilares de celulose vegetal por meio do processo combinado – Avaliação do gasto energético [Production of plant cellulose nanofibrils suspension through the combined process – evaluation of energy expenditure]. Rev Mater 23(4):9p. https://doi.org/10.1590/S1517-707620180004.0603CrossRef

Rossi BR, Pellengrini VOA, Cortez AA, Chiromito EMS, Carvalho AJF, Pinto LO, Rezende CA, Mastelaro VR, Polikarpov I (2021) Cellulose nanofibers production using a set of recombinant enzymes. Carbohydr Polym 256:117510. https://doi.org/10.1016/j.carbpol.2020.117510CrossRefPubMed

Santos AMP, Yoshida CMP (2011) Embalagem [Packaging]. EDUFRPE 152p, Recife

Scatolino MV, Fonseca CS, Da Silva Gomes M, Rompa VD, Martins MA, Tonoli GHD, Mendes LM (2018) How the surface wettability and modulus of elasticity of the amazonian paricá micro/nanofibrils films are affected by the chemical changes of the natural fibers. Eur J Wood Wood Prod 76:1581–1594. https://doi.org/10.1007/s00107-018-1343-7CrossRef

Schindelin J, Arganda-Carreras I, Frise E, Kaynig V, Longair M, Pietzsch T, Preibisch S, Rueden C, Saalfeld S, Schmid B, Tieneyez JY, White DJ, Hartenstein V, Eliceiri K, Tomancak P, Cardona A (2012) Fiji: an open-source platform for biológica-imagem analysis. Nat Methods 9(7):676–682. https://doi.org/10.1038/nmeth.2019CrossRefPubMed

Spence KL, Venditti RA, Rojas OJ, Habibi Y, Pawlak JJ (2011) A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods. Cellulose 18:1097–1111. https://doi.org/10.1007/s10570-011-9533-zCrossRef

Stamm AJ (1964) Wood and cellulose science. The Ronald Press Company, New York, p 549

Takada M, Chandra R, Wu J, Sanddler JN (2020) The influence of lignin on the effectiveness of using a chemithermomechanical pulping based process to pretreat softwood chips and pellets prior to enzymatic hydrolysis. Biores technol 302:122895. https://doi.org/10.1016/j.biortech.2020.122895CrossRef

Tao P, Wu Z, Xing C, Zhang Q, Wei Z, Nie S (2019) Effect of enzymatic treatment on the thermal stability of cellulose micro/nanofibrils. Cellulose 26:7717–7725. https://doi.org/10.1007/s10570-019-02634-3CrossRef

TAPPI T 222 om-15 (2015) Acid-insoluble lignin in wood and pulp. Test methods. Technical Association of The Pulp And Paper Industry, Atlanta, United States

TAPPI T 233 cm-15 (2015) Test Method T 233 cm-15. Fiber length of pulp by classification. Technical Association of The Pulp And Paper Industry, Atlanta, United States

Tarrés Q, Saguer E, Pèlach MA, Alcalà M, Delgado-Aguilar M, Mutjé P (2016) The feasibility of incorporating cellulose micro/nanofibers in papermaking processes: the relevance of enzymatic hydrolysis. Cellulose 23:1433–1445. https://doi.org/10.1007/s10570-016-0889-yCrossRef

Tian X, Lu P, Song X, Nie S, Liu Y, Liu M (2017) Enzyme-assisted mechanical production of microfibrillated cellulose from Northern bleached Softwood Kraft Pulp. Cellulose 24:3929–3942. https://doi.org/10.1007/s10570-017-1382-yCrossRef

Tonoli GHD, Holtman KM, Glenn G, Fonseca AS, Wood D, Willians T, Sa VA, Torres L, Klamczynski A, Orts WJ (2016) Properties of cellulose micro/nanofibers obtained from Eucalyptus pulp fiber treated with anaerobic digestate and high shear mixing. Cellulose 23(2):1239–1256. https://doi.org/10.1007/s10570-016-0890-5CrossRef

Tonoli GHD, Holtman K, Silva LE, Wood D, Torres L, Williams T, Oliveira JE, Fonseca AS, Klamczynski A, Gleen G, Orts W (2021) Changes on structural characteristics of cellulose pulp fiber incubated for different times in anaerobic digestate. Cerne 27:e–102647. doi:https://doi.org/10.1590/01047760202127012647CrossRef

Wallis AFA, Wearne RH, Wright PJ (1996) Chemical analysis of polysaccharides in plantation eucalypt woods and pulps. Appita J 49(4):258–262

Wang QQ, Zhu JY, Gleisner R, Kuster TA, Baxa U, McNeil SE (2012) Morphological development of cellulose fibrils of a bleached Eucalyptus pulp by mechanical fibrillation. Cellulose 19(5):1631–1643. https://doi.org/10.1007/s10570-012-9745-xCrossRef

Winter HT, Cerclier C, Delorme N, Bizot H, Quemener B, Cathala B (2010) Improved colloidal stability of bacterial cellulose nanocrystal suspensions for the elaboration of spin-coated cellulose-based model surfaces. Biomacromolecules 11(11):3144–3151. https://doi.org/10.1021/bm100953fCrossRefPubMed

Xiao B, Sun XF, Sun RC (2001) Chemical, structural, and thermal characterizations of alkali-soluble lignins and hemicelluloses, and cellulose from maize stems, rye straw, and rice straw. Polym Degrad Stab 74(2):2:307–319. https://doi.org/10.1016/S0141-3910(01)00163-XCrossRef

Xie Y, Pan Y, Cai P (2022) Cellulose-based antimicrobial films incroporated with ZnO nanopillars on surface as biodegradable and antimicrobial packaging. Food Chem 368:130784. https://doi.org/10.1016/j.foodchem.2021.130784CrossRefPubMed

Yan M, Tian C, Wy T, Huang X, Zhong Y, Yang P, Zhang L, Ma J, Lu H, Zhou X (2021) Insights into structure and properties of cellulose micro/nanofibrils (CNFs) prepared by screw extrusion and deep eutectic solvent permeation. Int J Biol Macromol 191:422–431. https://doi.org/10.1016/j.ijbiomac.2021.09.105CrossRefPubMed

Zhang H, Takezawa A, Ding X, Xu S, Duan P, Li H, Guo H (2021) Bi-material microstructural design of biodegradable composites using topology optimization. Mat Des 209:109973. https://doi.org/10.1016/j.matdes.2021.109973CrossRef

Zhang K, Zhang Y, Yan D, Zhang C, Nie S (2018) Enzyme-assisted mechanical production of cellulose micro/nanofibrils: thermal stability. Cellulose 29(9). https://doi.org/10.1007/s10570-018-1928-7

Zhu H, Luo W, Ciesielski PN, Fang Z, Zhu JY, Henriksson G (2016) Wood derived materials for green electronics, biological devices, and energy applications. Chem Reviews 116:9305–9374. https://doi.org/10.1021/acs.chemrev.6b00225CrossRef

Zhu H, Zhu S, Jia Z, Parvinian S, Li Y, Vaaland O, Hu L, Li T (2015) Anomalous scaling law of strength and toughness of cellulose nanopaper. Proc Natl Acad Sci 112:8971–8976. https://doi.org/10.1073/pnas.150287011CrossRefPubMedPubMedCentral

Titel: The use of enzymatic pre-treatment to facilitate and reduce the energy consumption of unbleached cellulose micro/nanofibrils production from Eucalyptus spp. and Pinus spp. kraft pulps
verfasst von: Allan de Amorim dos Santos
Maryella Júnnia Ferreira e Silva
Luiz Eduardo Silva
Maressa Carvalho Mendonça
Renato Augusto Pereira Damásio
Gustavo Henrique Denzin Tonoli
Publikationsdatum: 10.02.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 4/2023
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-023-01925-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Radial variation in anatomical wood characteristics and physical properties of Paulownia elongata x Paulownia fortunei hybrid Cotevisa 2 from fast-growing plantations

Insights into the combustion behavior of cork and phloem: effect of chemical components and biomass morphology

Thermal degradation, flame retardancy, and char analysis of ammonium phytate-based flame retardant treated loblolly pine wood

The durability of acetylated beech (Fagus sylvatica L.) laminated veneer lumber (LVL) against wood-destroying basidiomycetes

Response surface methodology approach for dyeing process optimization of Ayous (Triplochiton scleroxylon) wood with acid dye

Evaluation of wood treated with Paraloid B72® and boric acid: thermal behavior, water absorption and mold resistance