nach oben

Fire Technology

Erschienen in:

22.01.2023

Influence of Wind Speeds and Heating Exposures on the Thermal Insulation of Intumescent Fire-Retardant Coatings

verfasst von: Yuhao Li, Chuangang Fan, Yuxin Gao, Long Yan, Ao Jiao, Saiya Feng, Zhengyang Wang

Erschienen in: Fire Technology | Ausgabe 2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The standard fire resistance test failed to consider the effect of environmental wind on intumescent fire-retardant coatings. This study investigated the thermal insulation of intumescent fire-retardant coatings under various heating exposures (25 kW/m², 35 kW/m², 50 kW/m² and 75 kW/m²) and wind speeds (0 m/s, 1 m/s, 2 m/s, 3 m/s). Fire-retardant coating presented a non-uniform intumescent process with wind influence. Environmental wind slowed the initial swelling rate, decreased the maximum coating thickness, and promoted the coating thickness decline. The coating at the front end was shorter than the rear end, which caused a higher steel temperature at the front end. The time of the steel temperature to reach the critical temperature was advanced indicating a decreased thermal insulation. Environmental wind caused a higher coating temperature and accelerated the coating depletion at the front end. The influence is stronger with higher heating exposure and faster wind speed. Wind affects the coating temperature and coating thickness via convective cooling and char oxidation, and char oxidation is a more dominant factor. Empirical correlations were applied to represent the influence of environmental wind on the maximum swelled thicknesses and average swelling rates of fire-retardant coatings at the front end. The predicting equation indicated the synergistic effects of wind speed and incident heat flux on the thermal insulation of fire-retardant coating.

Vorheriger Artikel Brine Water Experiments on Transient Flow and Evolution to Multiple States in Inclined Tunnel Fire with Forced Longitudinal Flow

Nächster Artikel Predicting and Assessing Wildfire Evacuation Decision-Making Using Machine Learning: Findings from the 2019 Kincade Fire

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Silva D, Bilotta A, Nigro E (2019) Experimental investigation on steel elements protected with intumescent coating. Constr Build Mater. https://doi.org/10.1016/j.conbuildmatCrossRef

Yan L, Xu Z, Liu D (2019) Synthesis and application of novel magnesium phosphate ester flame retardants for transparent intumescent fire-retardant coatings applied on wood substrates. Prog Org Coat. https://doi.org/10.1016/j.porgcoat.2019.01.013CrossRef

Usmani AS, Rotter JM, Lamont S et al (2001) Fundamental principles of structural behaviour under thermal effects. Fire Saf J. https://doi.org/10.1016/S0379-7112(01)00037-6CrossRef

GB51249-2017 (2018) Code for fire safety of steel structures in buildings. National Standardization Administration of China

GB14907-2018 (2018) Fire resistive coating for steel structure. National Standardization Administration of China

Lucherini A, Maluk C (2019) Intumescent coatings used for the fire-safe design of steel structures: a review. J Constr Steel Res. https://doi.org/10.1016/j.jcsr.2019.105712CrossRef

Staggs JEJ, Crewe RJ, Butler R (2012) A theoretical and experimental investigation of intumescent behaviour in protective coatings for structural steel. Chem Eng Sci. https://doi.org/10.1016/j.ces.2011.12.010CrossRef

Lucherini A, Lam HY, Jimenez M (2022) Fire testing of intumescent coatings: comparison between bench-scale furnace and radiant panels experimental methodologies. Fire Technol. https://doi.org/10.1007/s10694-022-01216-3CrossRef

Lucherini A, Razzaque QS, Maluk C (2019) Exploring the fire behaviour of thin intumescent coatings used on timber. Fire Saf J. https://doi.org/10.1016/j.firesaf.2019.102887CrossRef

10.

Lucherini A, Hidalgo JP, Torero JL, Maluk C (2021) Influence of heating conditions and initial thickness on the effectiveness of thin intumescent coatings. Fire Saf J. https://doi.org/10.1016/j.firesaf.2020.103078CrossRef

11.

ISO 834-1 (1999) Fire resistance tests—elements of building construction—part 1: general requirements for fire resistance testing. International Organization for Standardization (ISO), Geneva

12.

EN 13381-13388 (2013) Test methods for determining the contribution to the fire resistance of structural members—part 8: applied reactive protection to steel members brussels. Comité Europeén de Normalization (CEN)

13.

GB 12441-2018 (2018) Finishing fire resistant. National Standardization Administration of China

14.

Robertson A, Gross D (1970) Fire load, fire severity, and fire endurance. ASTM Int. https://doi.org/10.1520/STP44709SCrossRef

15.

Lucherini A, Giuliani L, Jomaas G (2018) Experimental study of the performance of intumescent coatings exposed to standard and non-standard fire conditions. Fire Saf J. https://doi.org/10.1016/j.firesaf.2017.10.004CrossRef

16.

Williams FA (1982) Urban and wildland fire phenomenology. Prog Energy Combust Sci. https://doi.org/10.1016/0360-1285(82)90004-1CrossRef

17.

Liu N, Lei J, Gao W et al (2021) Combustion dynamics of large-scale wildfires. Proc Combust Inst. https://doi.org/10.1016/j.proci.2020.11.006CrossRef

18.

Zhao W, Ouyang R, Ran Q et al (2021) An experimental study on smoke back-layering and critical velocity in tunnel fires with canyon cross wind. J Wind Eng Ind Aerodyn. https://doi.org/10.1016/j.jweia.2020.104477CrossRef

19.

Li M, Gao Z, Ji J et al (2017) Wind effects on flame projection probability from a compartment with opposing openings. Fire Saf J. https://doi.org/10.1016/j.firesaf.2017.04.037CrossRef

20.

Fang X, Ren F, Zhang X et al (2020) Facade flame height ejected from opening of a compartment under the coupling effect of side walls and ambient wind. Fire Saf J. https://doi.org/10.1016/j.firesaf.2020.102966CrossRef

21.

Hu L, Zhang X, Delichatsios MA et al (2017) Pool fire flame base drag behavior with cross flow in a sub-atmospheric pressure. Proc Combust Inst. https://doi.org/10.1016/j.proci.2016.06.139CrossRef

22.

Pitts WM (1991) Wind effects on fires. Prog Energy Combust Sci. https://doi.org/10.1016/0360-1285(91)90017-HCrossRef

23.

Węgrzyński W, Lipecki T (2018) Wind and fire coupled modelling—part I: literature review. Fire Technol. https://doi.org/10.1007/s10694-018-0748-5CrossRef

24.

Bai ZP, Li YF, Zhao YH (2019) Study on characteristics of fire plume in building facade window under lateral blow. PLoS ONE. https://doi.org/10.1371/journal.pone.0225120CrossRef

25.

Hu LH, Sun XP, Zhang XL et al (2018) Facade flame height and horizontal extending distance from opening of compartment fire with external sideward wind. Proc Combust Inst. https://doi.org/10.1016/j.proci.2018.06.2013CrossRef

26.

Ren F, Hu LH, Sun XP, Hu KZ (2018) An experimental study on vertical temperature profile of facade fire plume ejected from compartment with an opening subjected to external wind normal to façade. Int J Therm Sci. https://doi.org/10.1016/j.ijthermalsci.2018.04.008CrossRef

27.

Gao W, Liu NA, Delichatsios M et al (2016) Fire spill plume from a compartment with dual symmetric openings under cross wind. Combust Flame. https://doi.org/10.1016/j.combustflame.2016.01.011CrossRef

28.

Gomez-Mares M, Tugnoli A, Landucci G et al (2012) Behavior of intumescent epoxy resins in fireproofing applications. J Anal Appl Pyrolysis. https://doi.org/10.1016/j.jaap.2012.05.010CrossRef

29.

Bu R, Zhou Y, Shi L, Fan C (2021) Experimental study on combustion and flame spread characteristics in horizontal arrays of discrete fuels. Combust Flame. https://doi.org/10.1016/j.combustflame.2020.10.049CrossRef

30.

Bu R, Shi L, Zhou Y (2021) Identifying the criterion for discrete flame spread over single-row birch rods. Fire Saf J. https://doi.org/10.1016/j.firesaf.2020.103116CrossRef

31.

Naik AD, Duquesne S, Bourbigot S (2016) Hydrocarbon time-temperature curve under airjet perturbation: an in situ method to probe char stability and integrity in reactive fire protection coatings. J Fire Sci. https://doi.org/10.1177/0734904116658049CrossRef

32.

Jimenez M, Duquesne S, Bourbigot S (2006) Characterization of the performance of an intumescent fire protective coating. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2006.01.026CrossRef

33.

Hu Y, Yang J, Baniotopoulos C et al (2020) Dynamic analysis of offshore steel wind turbine towers subjected to wind wave and current loading during construction. Ocean Eng. https://doi.org/10.1016/j.oceaneng.2020.108084CrossRef

34.

Li C, Liu Y, Li H (2021) Fragility assessment and optimum design of a steel-concrete frame structure with hybrid energy-dissipated devices under multi-hazards of earthquake and wind. Eng Struct. https://doi.org/10.1016/j.engstruct.2021.112878CrossRef

35.

Pieper L, Mahendran M (2022) Pull-through failure of crest-fixed steel claddings under combined wind and bushfire conditions. Thin-Walled Struct. https://doi.org/10.1016/j.tws.2022.109011CrossRef

36.

Fan CG, Li YH, Gao YX (2022) Effect of ambient wind on the flame retardancy of intumescent coatings. J Therm Anal Calorim. https://doi.org/10.1007/s10973-022-11593-0CrossRef

37.

Shen Y, Jiao A, Chen T et al (2021) Experimental study on smoke movement characteristics in tunnel fires with different canyon cross wind yaw angles. Tunn Undergr Space Technol. https://doi.org/10.1016/j.tust.2021.104129CrossRef

38.

Zhu YL, Zhang F, Xing LP et al (2022) Construction and verification of a heat transfer model for intumescent coatings. Prog Org Coat. https://doi.org/10.1016/j.porgcoat.2022.106868CrossRef

39.

Fateh T, Guillaume E, Joseph P (2017) An experimental study of the thermal performance of a novel intumescent fire protection coating. Fire Saf J. https://doi.org/10.1016/j.firesaf.2017.05.021CrossRef

40.

Juan PH, Tristan G, Vinny G (2019) The Malveira fire test: Full-scale demonstration of fire modes in open-plan compartments. Fire Saf J. https://doi.org/10.1016/j.firesaf.2019.102827CrossRef

41.

Zhang Y, Wang YC, Bailey CG, Taylor AP (2012) Global modelling of fire protection performance of intumescent coating under different cone calorimeter heating conditions. Fire Saf J. https://doi.org/10.1016/j.firesaf.2012.02.004CrossRef

42.

Lai D, Gong J, Zhou X et al (2021) Pyrolysis and piloted ignition of thermally thick PMMA exposed to constant thermal radiation in cross forced airflow. J Anal Appl Pyrolysis. https://doi.org/10.1016/j.jaap.2021.105042CrossRef

43.

Hu LH, Liu S, Wu L (2013) Flame radiation feedback to fuel surface in medium ethanol and heptane pool fires with cross air flow. Combust Flame. https://doi.org/10.1016/j.combustflame.2012.10.016CrossRef

44.

Wu TR, Zhou R, Zhang YP et al (2022) Spread behavior of spill fire under lateral wind and temperature distribution of PE sandwich panels on façade. Case Stud Constr Mater. https://doi.org/10.1016/j.cscm.2022.e01357CrossRef

45.

Ma YX, Hu LH, Huang YJ et al (2021) Effect of sample thickness on concurrent steady spread behavior of floor- and ceiling flames. Combust Flame. https://doi.org/10.1016/j.combustflame.2021.111600CrossRef

46.

Zhao K, Gollner MJ, Liu Q et al (2022) Lateral flame spread over PMMA under forced air flow. Fire Technol. https://doi.org/10.1007/s10694-019-00904-xCrossRef

47.

Climate and Average Weather Year Round in Changsha (China) (2016), Weather Spark. https://weatherspark.com/y/116088/Average-Weather-in-Changsha-China-Year-Round. Accessed 26 Aug 2022

48.

Zhou YY, Walther DC, Fernandez-Pello AC (2002) Numerical analysis of piloted ignition of polymeric materials. Combust Flame. https://doi.org/10.1016/S0010-2180(02)00396-6CrossRef

49.

Lucherini A, Maluk C (2019) Assessing the onset of swelling for thin intumescent coatings under a range of heating conditions. Fire Saf J. https://doi.org/10.1016/j.firesaf.2019.03.014CrossRef

50.

Rich D, Lautenberger C, Torero JL et al (2007) Mass flux of combustible solids at piloted ignition. Proc Combust Inst Inst. https://doi.org/10.1016/j.proci.2006.08.055CrossRef

51.

Horrocks AR, Price D (2008) Advances in fire retardant materials. Woodhead Publishing Limited, Abington HallCrossRef

Titel: Influence of Wind Speeds and Heating Exposures on the Thermal Insulation of Intumescent Fire-Retardant Coatings
verfasst von: Yuhao Li
Chuangang Fan
Yuxin Gao
Long Yan
Ao Jiao
Saiya Feng
Zhengyang Wang
Publikationsdatum: 22.01.2023
Verlag: Springer US
Erschienen in: Fire Technology / Ausgabe 2/2023
Print ISSN: 0015-2684
Elektronische ISSN: 1572-8099
DOI: https://doi.org/10.1007/s10694-023-01366-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 2/2023

Brine Water Experiments on Transient Flow and Evolution to Multiple States in Inclined Tunnel Fire with Forced Longitudinal Flow

Emerging Risks of Wildfires at the Wildland-Urban Interface in Mexico

Study on the Reversible and Irreversible Heat Generation of the Lithium-Ion Battery with LiFePO4 Cathode

Analysis of Visual Characteristics of Short-circuited Arc Sites

Experimental Study of the Effect of Opening Factor on Self-Extinguishing and Blue Ghosting Flame in Under-Ventilated Compartment Fire

Fire and Smoke Detection Using Capsule Network